Interior plastering - CT 126

Adhesive gypsum-based interior plaster is recommended for leveling the surfaces and filling the unevenness in a 2-10 mm layer, as well as for gluing the plasterboards.
Ceresit CT 126 plasterboard is very resistant and has a high degree of adhesion. This interior tile is designed to cover traditionally plastered surfaces and concrete surfaces. Ceresit CT 126 plasterboard is also suitable for gluing the plasterboards. Finishing is done with trowel iron or sanding, the result is a matt white finish of very good quality. Ceresit CT 126 plasterboard is distributed in 5 kg and 20 kg bags.
CHARACTERISTICS

• the Ceresit CT 126 interior tile allows for layers of up to 10 mm
• the Ceresit CT 126 interior tile offers great resistance in short time
• the Ceresit CT 126 interior tile has a high degree of adhesion
• the Ceresit CT 126 interior tile offers a matt white finish of very good quality
• the Ceresit CT 126 interior tile provides the crack resistance in a thick layer

AREAS OF USE

• The Ceresit CT 126 interior shutter is designed to cover traditionally plastered surfaces and concrete surfaces. Finishing can be done traditionally by grinding with glasspapier or by smoothing with the scouring iron shortly before the applyed material hardens to the wall.
• The Ceresit CT 126 interior can accommodate surfaces with loads of up to 10 mm in one layer.
• The surface tiled with the Ceresit CT 126 interior tile will become perfectly smooth and matte white. If desired, the interior tile can be painted after drying with dispersion paints or based on organic solvents.
• The Ceresit CT 126 interior board is also suitable for gluing plasterboard and gypsum boards.
• This interior tile can be used inside buildings in dry places without permanent humidity.

PACKING

• The Ceresit CT 126 plasterboard is packed in 5kg and 20kg bags.

Download technical data sheet: CT126 - technical sheet
Download Safety Data Sheet: CT126 - Security Sheet